Помогите с RSI

return val_RSI, val_EMARSI

return val_EMARSI

Settings = {
Name = "*RSI xMA",
Period = 14, 
Metod = "MMA", --SMA, MMA, EMA, WMA, SMMA, VMA
VType = "Close", --Open, High, Low, Close, Volume, Median, Typical, Weighted, Difference
line = {{
      Name = "Horizontal line (top)",
      Type = TYPE_LINE, 
      Color = RGB(140, 140, 140)
      },
      {
      Name = "Horizontal line (bottom)",
      Type = TYPE_LINE, 
      Color = RGB(140, 140, 140)
      },
      {
      Name = "RSI",
      Type = TYPE_LINE, 
      Color = RGB(221, 44, 44)
      },
      {
      Name = "EMARSI",
      Type = TYPE_LINE, 
      Color = RGB(0, 0, 255)
      }
      },
MA_Period = 26,
MA_Method = "EMA",
Round = "on",
Multiply = 1,
Horizontal_line="20"
}

function Init()
   func = RSI()
   return #Settings.line
end

function OnCalculate(Index)
local Out = ConvertValue(Settings, func(Index, Settings))
local HL = tonumber(Settings.Horizontal_line)
   if HL then
      return 50+HL,50-HL,Out
   else
      return nil,nil,Out
   end
end

function RSI() --Relative Strength I("RSI")
   local RSI_MA_U = MA()
   local RSI_MA_D = MA()
   local EMARSI_MA = MA()
   local sumU = {}
   local sumD = {}
   local cand = {pp=nil, p=nil}
   local it = {pp=0, p=0, l=0}
return function (I, Fsettings, ds)
local Fsettings=(Fsettings or {})
local P = (Fsettings.Period or 14)
local M = (Fsettings.Metod or MMA)
local VT = (Fsettings.VType or CLOSE)
local P2 = (Fsettings.MA_Period or 26)
local M2 = (Fsettings.MA_Method or "EMA")
if (P>0) then
   if I == 1 then
      it = {pp=0, p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then 
         it={pp=it.p, p=I, l=it.l+1}
         cand.pp = cand.p
      end
      cand.p = GetValueEX(it.p,VT,ds)
      local Up = 0
      local Down = 0
      if it.l > 1 then
         if cand.pp < cand.p then
            Up = cand.p - cand.pp
         end
         if cand.pp > cand.p then
            Down = cand.pp - cand.p
         end
      end
      local val_Up = RSI_MA_U(it.l, {Period=P, Metod = M, VType=ANY}, {[it.l] = Up})
      local val_Down = RSI_MA_D(it.l, {Period=P, Metod = M, VType=ANY}, {[it.l] = Down})
      local val_RSI = nil
      local val_EMARSI = nil
      if it.l >= P then
         if val_Down==0 then 
            val_RSI = 100
            val_EMARSI = EMARSI_MA(it.l, {Period=P2, Metod = M2, VType=ANY}, {[it.l] = val_RSI})
            return val_RSI, val_EMARSI
         else
            val_RSI = 100 - (100 / (1 + (val_Up / val_Down)))
            val_EMARSI = EMARSI_MA(it.l, {Period=P2, Metod = M2, VType=ANY}, {[it.l] = val_RSI})
            return val_RSI, val_EMARSI
         end
      end
   end
end
return nil
end
end

function MA() --Moving Average ("MA")
   local T_MA = {[SMA]=F_SMA(),[MMA]=F_MMA(),[EMA]=F_EMA(),[VMA]=F_VMA(),[SMMA]=F_SMMA(),[WMA]=F_WMA()}
return function (I, Fsettings, ds)
   local Fsettings=(Fsettings or {})
   local P = (Fsettings.Period or 14)
   if (P > 0) then
      return T_MA[string.upper(Fsettings.Metod or EMA)](I, P, (Fsettings.VType or CLOSE), ds)
   end
return nil
end
end

------------------------------------------------------------------
----Moving Average SMA, MMA, EMA, WMA, SMMA, VMA
------------------------------------------------------------------
--[[Simple Moving Average (SMA)
SMA = sum(Pi) / n]]
function F_SMA()
   local sum = {}
   local it = {p=0, l=0}
return function (I, P, VT, ds)
   if I == 1 then
      sum = {}
      it = {p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then it={p=I, l=it.l+1} end
      local Ip,Ipp,Ippp = Squeeze(it.l,P),Squeeze(it.l-1,P),Squeeze(it.l-P,P)
      sum[Ip] = (sum[Ipp] or 0) + GetValueEX(it.p,VT,ds)
      if it.l >= P then
         return (sum[Ip] - (sum[Ippp] or 0)) / P
      end
   end
return nil
end
end

--[[Modified Moving Average (MMA)
MMA = (MMAi-1*(n-1) + Pi) / n]]
function F_MMA() 
   local sum = {}
   local tmp = {pp=nil, p=nil}
   local it = {p=0, l=0}
return function(I, P, VT, ds)
   if I == 1 then
      sum = {}
      tmp = {pp=nil, p=nil}
      it = {p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then 
         it = {p=I, l=it.l+1} 
         tmp.pp = tmp.p
      end
      local Ip,Ipp,Ippp = Squeeze(it.l,P),Squeeze(it.l-1,P),Squeeze(it.l-P,P)
      if it.l <= P + 1 then
         sum[Ip] = (sum[Ipp] or 0) + GetValueEX(it.p,VT,ds)
         if (it.l == P) or (it.l == P + 1) then
            tmp.p = (sum[Ip] - (sum[Ippp] or 0)) / P
         end
      else
         tmp.p = (tmp.pp*(P-1) + GetValueEX(it.p,VT,ds)) / P
      end
      if it.l >= P then
         return tmp.p
      end
   end
return nil
end
end

--[[Exponential Moving Average (EMA)
EMAi = (EMAi-1*(n-1)+2*Pi) / (n+1)]]
function F_EMA() 
   local tmp = {pp=nil, p=nil}
   local it = {p=0, l=0}
return function(I, P, VT, ds)
   if I == 1 then
      tmp = {pp=nil, p=nil}
      it = {p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then 
         it = {p=I, l=it.l+1} 
         tmp.pp = tmp.p
      end
      if it.l == 1 then
         tmp.p = GetValueEX(it.p,VT,ds)
      else
         tmp.p = (tmp.pp*(P-1) + 2*GetValueEX(it.p,VT,ds)) / (P+1)
      end
      if it.l >= P then
         return tmp.p
      end
   end
return nil
end
end

--[[
William Moving Average (WMA)
( Previous WILLMA * ( Period - 1 ) + Data ) / Period]]
function F_WMA()
   local tmp = {pp=nil, p=nil}
   local it = {p=0, l=0}
return function(I, P, VT, ds)
   if I == 1 then
      tmp = {pp=nil, p=nil}
      it = {p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then 
         it={p=I, l=it.l+1}
         tmp.pp = tmp.p
      end
      if it.l == 1 then
         tmp.p = GetValueEX(it.p,VT,ds)
      else
         tmp.p = (tmp.pp * (P-1) + GetValueEX(it.p,VT,ds)) / P
      end
      if it.l >= P then
         return tmp.p
      end
   end
return nil
end
end

--[[Volume Adjusted Moving Average (VMA)
VMA = sum(Pi*Vi) / sum(Vi)]]
function F_VMA()
   local sum = {}
   local sum2 = {}
   local it = {p=0, l=0}
return function(I, P, VT, ds)
   if I == 1 then
      sum = {}
      sum2 = {}
      it = {p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then it={p=I, l=it.l+1} end
      local Ip,Ipp,Ippp = Squeeze(it.l,P),Squeeze(it.l-1,P),Squeeze(it.l-P,P)
      sum[Ip] = (sum[Ipp] or 0) + GetValueEX(it.p,VT,ds) * GetValueEX(it.p,VOLUME,ds)
      sum2[Ip] = (sum2[Ipp] or 0) + GetValueEX(it.p,VOLUME,ds)
      if it.l >= P then
         return (sum[Ip] - (sum[Ippp] or 0)) / (sum2[Ip] - (sum2[Ippp] or 0))
      end
   end
return nil
end
end

--[[Smoothed Moving Average (SMMA)
SMMAi = (sum(Pi) - SMMAi-1 + Pi) / n]]
function F_SMMA()
   local sum = {}
   local sum2 = {}
   local it = {p=0, l=0}
return function(I, P, VT, ds)
   if I == 1 then
      sum = {}
      sum2 = {}
      it = {p=0, l=0}
   end
   if CandleExist(I,ds) then
      if I~=it.p then it={p=I, l=it.l+1} end
      local Ip,Ipp,Ippp = Squeeze(it.l,P),Squeeze(it.l-1,P),Squeeze(it.l-P,P)
      sum[Ip] = (sum[Ipp] or 0) + GetValueEX(it.p,VT,ds)
      if it.l >= P then
         if it.l == P then
            sum2[Ip] = (sum[Ip] - (sum[Ippp] or 0)) / P
         else
            sum2[Ip] = ((sum[Ip] - (sum[Ippp] or 0)) - (sum2[Ipp] or 0)+ GetValueEX(it.p,VT,ds)) / P
         end
         return sum2[Ip]
      end
   end
return nil
end
end


SMA,MMA,EMA,WMA,SMMA,VMA = "SMA","MMA","EMA","WMA","SMMA","VMA"
OPEN,HIGH,LOW,CLOSE,VOLUME,MEDIAN,TYPICAL,WEIGHTED,DIFFERENCE,ANY = "O","H","L","C","V","M","T","W","D","A"

function CandleExist(I,ds)
return (type(C)=="function" and C(I)~=nil) or
   (type(ds)=="table" and (ds[I]~=nil or (type(ds.Size)=="function" and (I>0) and (I<=ds:Size()))))
end

function Squeeze(I,P)
   return math.fmod(I-1,P+1)
end

function ConvertValue(T,...)
local function r(V, R) 
   if R and string.upper(R)== "ON" then R=0 end
   if V and tonumber(R) then
      if V >= 0 then return math.floor(V * 10^R + 0.5) / 10^R
      else return math.ceil(V * 10^R - 0.5) / 10^R end
   else return V end
end
   if arg.n > 0 then
      for i = 1, arg.n do
         arg[i]=arg[i] and r(arg[i] * ((T and T.Multiply) or 1), (T and T.Round) or "off")
      end
      return unpack(arg)
   else return nil end
end

function GetValueEX(I,VT,ds) 
VT=(VT and string.upper(string.sub(VT,1,1))) or ANY
   if VT == OPEN then         --Open
      return (O and O(I)) or (ds and ds:O(I))
   elseif VT == HIGH then       --High
      return (H and H(I)) or (ds and ds:H(I))
   elseif VT == LOW then      --Low
      return (L and L(I)) or (ds and ds:L(I))
   elseif VT == CLOSE then      --Close
      return (C and C(I)) or (ds and ds:C(I))
   elseif VT == VOLUME then      --Volume
      return (V and V(I)) or (ds and ds:V(I)) 
   elseif VT == MEDIAN then      --Median
      return ((GetValueEX(I,HIGH,ds) + GetValueEX(I,LOW,ds)) / 2)
   elseif VT == TYPICAL then   --Typical
      return ((GetValueEX(I,MEDIAN,ds) * 2 + GetValueEX(I,CLOSE,ds))/3)
   elseif VT == WEIGHTED then   --Weighted
      return ((GetValueEX(I,TYPICAL,ds) * 3 + GetValueEX(I,OPEN,ds))/4) 
   elseif VT == DIFFERENCE then   --Difference
      return (GetValueEX(I,HIGH,ds) - GetValueEX(I,LOW,ds))
   else                     --Any
      return (ds and ds[I])
   end
return nil
end